Before returning this product to the store of purchaseContact Dee Zee if you experience the following problems: •MissingParts •Installat
TB91782001X2TB91782002NX2TB91782004NX1TB91782003-ASSMX1PN 649X16PN 443X16X1GSK-535 FT.I6mm WASHER 5/32" ALLEN WRENCHJDee Zee Dog Box Assembly Ins
WRENCH/RATCHET3/8", 1/2"ALLEN WRENCH SUPPLIED IN KITTIN SNIPSUTILITY KNIFE OR SCISSORSPlace one of the TOP/BOTTOM pieces [A] with the bends
Loosely attach the other SIDE piece [B] with two 6mm bolts [E] and washers [F].Do NOT completely tighten.Insert the BACK piece [C] on one end. The up
Insert the FRONT piece [D] on the other end. Like the back piece in the previous step, The upper and lower corners must be inside the bends of the si
Thread the remaining 6mm bolts [E] and washers [F] into the six holes left on each side.Shift the pieces of the body as necessary to align the holes f
This is an optional step. You can choose to take the EDGE TRIM [H] and install it around the front opening of the dog box. Start the edge trim at the
There are 3 different options for the door.If you want the door to close freely without applying any pressure to it, do not install either of the gask
Using a 3/8" and 1/2" wrench or socket, tighten the latch bolt in place.If you have not used any gasket with the door, you will want the lat
Kommentare zu diesen Handbüchern