Dee-zee DZ16222 Bedienungsanleitung

Before returning this product to the store of purchaseContact Dee Zee if you experience the following problems:    •MissingParts   •Installat

Insert the threaded plate [G] into the rear outer mounting location.Once the threaded plate is in the opening, insert the threaded plate that was inst

When the inner plate is in the vehicle, rotated the brace around and capture the bolt from the outermounting location in the open ended slot.Pull down

Slide two square head bolts [I] into the channels on the underside of the running board.Line the bolts in the running board up with the slots in the b

Slide the board to the desired location from front to rear. A tape measure may be used to insurethe board is centered between the wheel wells. Slide

Dee Zee Running Board Installation InstructionsCongratulations on your purchase of a quality Dee Zee product. Dee Zee isrecognized as having the highe

DZ 16201DZ 16202DZ 16203X2DRIVER SIDE FRONT BRACEDRIVER SIDE REAR BRACEB 2194LP/B 2196LPX1B 2195LP/B 2197LPX1PASSENGER SIDE FRONT BRACEPASSENGER SIDE

WRENCH/RATCHET 13mm, 9/16"TAPETIN SNIPSMEASURELocate the existing holes shown below. There will be a front set of mounting locations,and a rear

On some vehicle trim levels, the driver side front inner mounting location may be coveredby a plastic panel.To attach the front brace, the panel can e

Using the 3/8" bolt [K], washer [L], and offset threaded plate [H], thread the bolt into the platethrough the hole in the front driver side brace

Insert the threaded plate [G] into the front outer mounting location.Once the threaded plate is in the opening, insert the threaded plate that was ins

When the inner plate is in the vehicle, rotated the brace around and capture the bolt from the outermounting location in the open ended slot.Pull down

Using the 3/8" bolt [K], washer [L], and offset threaded plate [H], thread the bolt into the platethrough the slot in the rear driver side brace