Dee-zee DZ3530 Bedienungsanleitung

Before returning this product to the store of purchaseContact Dee Zee if you experience the following problems:    •MissingParts   •Installat

Align the board with the vehicle from from to back and in/out. Once the board is in the desired location, tighten the bolts that attach the board to t

Dee Zee Running Board Installation InstructionsCongratulations on your purchase of a quality Dee Zee product. Dee Zee isrecognized as having the highe

K2012PK2013PREG CABX2K2014PX2B 2008LPX3REG CABX4EC RSPX4B 1792PX6ROUGH STEP RUNNING BOARD INSTALLATION INSTRUCTIONDODGE RAM 2009-CURRENT DZ 3527, DZ 3

WRENCH/RATCHET13mm, 15mm, 7/16"Install the 8mm nutsert [I] as shown below.The passenger's side is shown. The front of the vehicle is to the

Use the nutsert set tool [H] to crimp the nutserts in the holes.Hold the nut on the set tool with a 15mm wrench. Tighten the bolt in the set tool wit

When the brace is put up to the vehicle mounting location, the threaded plate must go into the large slot above the nutserts previously installed.Thre

Push up on the brace to put tension on the threaded plate in the large slot. Tighten the bolt with the threaded plate using a 13mm socket. Air tools

Slide the pre-assembled end cap into the end of the board [A] until the end cap is flush with theend of the board. The end cap must be inside the boa

Align the strap brackets [F] that were placed inside the board in the previous step with thebraces that are attached to the vehicle. Place an angle b