Before returning this product to the store of purchaseContact Dee Zee if you experience the following problems: •MissingParts •Installat
Place the tube on the braces as was done in Step 3 for the drivers side.Adjust the front brace to align with the slots in the bottom of the tube, depe
Dee Zee Running Board Installation InstructionsCongratulations on your purchase of a quality Dee Zee product. Dee Zee isrecognized as having the highe
*** TUBES SOLD SEPARATELYVARIESX2B 2013LPX3BRACKET LEFT HANDFRONTC DBRACKET RIGHT HAND BRACKET RIGHT HANDDZ 16316CHEVY SILVERADO / GMC SIERRA 2007-C
WRENCH/RATCHET13mm, 15mm, 21mmInstall the 8mm u-nut [F] as shown below.The driver's side is shown. The front of the vehicle is to the right of t
Attach the mounting bracket [B] to the mounting locations with the previously installed U-nutsusing the 8mm x 25mm bolt [E].2Tighten bolts with a 13mm
Once the brackets are in place, set the tube on the braces and adjust as necessary front to back.Look under the tube to determine which sets of slots
Set the tube back on the brackets and slide the U-nuts in the tube slots so that they alignwith the mounting slots in the braces. Repeat at all mount
For the passenger side, the middle and rear bracket installation will use bracket [C] and be identical to thesteps used for the driver's side. P
Using a 21mm socket, remove the front body shock mount bolt from the passenger side. Attach the brace to the body shock mount. Tighten the bolt enoug
Kommentare zu diesen Handbüchern